High-temperature furnaces with lift-up door and MoSi2 heating elements, up to 1800 °C, LHT modelsDostawca: Nabertherm
NABELHT417PN1TEA 64280 PLNNABELHT417PN1T NABELHT416PN1G NABELHT217PN1GT NABELHT817PN1G NABELHT216PN1G NABELHT816PN1 NABELHT818PN2GT NABELHT418PN2 NABELHT217PN1T NABELHT218PN2 NABELHT416PN1T NABELHT218PN2T NABELHT418PN2T NABELHT816PN1GT NABELHT816PN1T NABELHT818PN2T NABELHT107PN1 NABELHT216PN1T NABELHT816PN1G NABELHT416PN1 NABELHT418PN2GT NABELHT417PN1GT NABELHT416PN1GT NABELHT818PN2 NABELHT217PN1 NABELHT217PN1G NABELHT817PN1GT NABELHT417PN1G NABELHT216PN1GT NABELHT317PN1 NABELHT817PN1T NABELHT818PN2G NABELHT817PN1 NABELHT417PN1 NABELHT216PN1 NABELHT218PN2GT NABELHT418PN2G NABELHT218PN2G
High-temperature furnaces with lift-up door and MoSi2 heating elements, up to 1800 °C, LHT models
Piece i suszarki Piece muflowe i piece do spopielania
The LHT furnaces are designed as benchtop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges.
- Choice of models with Tmax 1600, 1750, or 1800 °C
- High-quality molybdenum disilicide heating elements
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Only fibre materials which are not classified as carcinogenic according to TRGS 905, class 1 or 2 are used
- Compact design with lift up door, opening upwards
- Adjustable air inlet
- Exhaust air opening in the roof
- Type B thermocouple
The furnace is equipped with the P470 professional controller (model LHT 01/17 D has P480 controller) with LC display, featuring 50 freely adjustable programs and 40 segments and 2 to 6 extra functions. These controllers are PID microprocessor controlled with a self-diagnostic system and integrated process documentation.
All units with volume ≥4 litre require 400 V three-phase power supply (400 V 3/N/PE). Optional accessories e.g. over-temperature limit controller with adjustable temperature cut out for thermal protection Class 2, in accordance with EN 60519-2 as temperature limiter to protect the oven and load, protective gas connection, manual or automatic gas supply systems are also available.
Uwaga: Maximum continuous operating temperature should be 50 °C below the maximum temperature of the model shown in the table above. Refence note heat up times: If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE. Please read the chapter for the first heat up cycle in the manual carefully.