Drukuj

High-temperature furnaces with lift up door and SiC rod, heating up to 1600 °C, LHTCT models

Dostawca: Nabertherm
NABELC033H6DN5EA 34920 PLN
NABELC033H6DN5 NABELC033H6DN5GT NABELC083H5DN8T NABELC083H4DN8T NABELC033H5DN5T NABELC033H4DN5 NABELC083H4DN8 NABELC033H4DN5G NABELC013H6DN1G NABELC033H6DN5T NABELC033H4DN5GT NABELC083H6DN8 NABELC083H6DN8G NABELC033H5DN5 NABELC083H5DN8GT NABELC083H5DN8 NABELC083H6DN8GT NABELC033H5DN5GT NABELC083H4DN8GT NABELC033H6DN5G NABELC083H6DN8T NABELC013H6DN1GT NABELC083H5DN8G NABELC013H6DN1T NABELC033H5DN5G NABELC013H6DN1 NABELC033H4DN5T NABELC083H4DN8G
High-temperature furnaces with lift up door and SiC rod, heating up to 1600 °C, LHTCT models
Piece i suszarki Piece muflowe i piece do spopielania
The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces good all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

  • Choice of models with Tmax 1400, 1500, 1550 or 1600 °C
  • SiC rod heating
  • Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
  • Only fibre materials which are not classified as carcinogenic according to TRGS 905, class 1 or 2 are used
  • Heating rods are easily replaced
  • Lift up door (LHTCT) with hot surface facing away from the operator
  • Adjustable air inlet opening, exhaust air opening in the roof

The furnace is equipped with the C450 controller with LC display, featuring 10 freely adjustable programs and 20 segments and 2 extra functions. These controllers are PID microprocessor controlled with a self-diagnostic system and integrated process documentation.

All units require 400 V three-phase power supply (400 V 3/N/PE) - only model LHTCT 01/16 is available with single phase 230 V 1/N/PE. Optional accessories e.g. over-temperature limit controller with adjustable temperature cut out for thermal protection Class 2, in accordance with EN 60519-2 as temperature limiter to protect the oven and load, chimney, chimney with fan, catalytic converter, protective gas connection, manual or automatic gas supply systems are also available.

Uwaga: Note: Maximum continuous operating temperature should be 50 ˚C below the max. temp. of the model shown above.
Height: Plus maximum 240 mm height for models LHTCT when open. Minutes to Tmax: If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE. The working life span of the heating elements depends on several factors. Basically, increased wear must be assumed when using the furnace at high working temperatures. A typical indication of durability: 1,000 operating hours can be expected with regular use between 1500 and 1550 °C. Higher temperatures disproportionally reduce the durability of the heating elements.
Zobacz ceny

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Więcej About VWR